LG Mobile Phone Unblock Secret Codes

LG all models test mode: Type 2945#*# on the main screen.
2945*#01*# Secret menu for LG
IMEI (ALL): *#06#
IMEI and SW (LG 510): *#07#
Software version (LG B1200): *8375#
Recount cheksum (LG B1200): *6861#
Factory test (B1200): #PWR 668
Simlock menu (LG B1200): 1945#*5101#
Simlock menu (LG 510W, 5200): 2945#*5101#
Simlock menu (LG 7020, 7010): 2945#*70001#

Motorola Mobile Phone Unblock Secret Codes

IMEI number:
*#06#
Code to lock keys. Press together *7
Note: [] (pause) means the * key held in until box appears.
Select phone line - (use this to write things below the provider name):
[] [] [] 0 0 8 [] 1 []
Add phonebook to main menu:
[] [] [] 1 0 5 [] 1 []
Add messages to main menu:
[] […]

Sony Ericsson Secret Menu: -> * <- <- * <- *
(-> means press joystick, arrow keys or jogdial to the right and <- means left.)
You’ll see phone model, software info, IMEI, configuration info, sim lock status, REAL time clock, total call time and text labels.
You can also test your phones services and hardware from this […]

Nokia Mobile Phone Unblock Secret Codes

On the main screen type
*#06# for checking the IMEI (International Mobile Equipment Identity).
*#7780# reset to factory settings.
*#67705646# This will clear the LCD display(operator logo).
*#0000# To view software version.
*#2820# Bluetooth device address.
*#746025625# Sim clock allowed status.
*#62209526# - Display the MAC address of the WLAN adapter. This is available only in the newer devices that supports WLAN […]
__________________

General Nokia Mobile Phone Unblock 8810 Secrets Codes

IMEI number
*#06#
Software Version
*#0000#

more for nokia

*#4357#
Spelling out the word HELP you get customer service, kinda cool

more of nokia

On the main screen type

*#06# for checking the IMEI (International Mobile Equipment Identity).

*#7780# reset to factory settings.

*#67705646# This will clear the LCD display(operator logo).

*#0000# To view software version.

*#2820# Bluetooth device address.

*#746025625# Sim clock allowed status.

*#62209526# - Display the MAC address of the WLAN adapter. This is available only in the newer devices that supports WLAN like N80

#pw+1234567890+1# Shows if sim have restrictions.

*#92702689# - takes you to a secret menu where you may find some of the information below:

1. Displays Serial Number.

2. Displays the Month and Year of Manufacture

3. Displays (if there) the date where the phone was purchased (MMYY)

4. Displays the date of the last repair - if found (0000)

5. Shows life timer of phone (time passes since last start)

*#3370# - Enhanced Full Rate Codec (EFR) activation. Increase signal strength, better signal reception. It also help if u want to use GPRS and the service is not responding or too slow. Phone battery will drain faster though.

*#3370* - (EFR) deactivation. Phone will automatically restart. Increase battery life by 30% because phone receives less signal from network.

*#4720# - Half Rate Codec activation.

*#4720* - Half Rate Codec deactivation. The phone will automatically restart

If you forgot wallet code for Nokia S60 phone, use this code reset: *#7370925538#
Note, your data in the wallet will be erased. Phone will ask you the lock code. Default lock code is: 12345

Press *#3925538# to delete the contents and code of wallet.

*#7328748263373738# resets security code.

Default security code is 12345

Unlock service provider: Insert sim, turn phone on and press vol up(arrow keys) for 3 seconds, should say pin code. Press C,then press * message should flash, press * again and 04*pin*pin*pin#

Change closed caller group (settings >security settings>user groups) to 00000 and ure phone will sound the message tone when you are near a radar speed trap. Setting it to 500 will cause your phone 2 set off security alarms at shop exits, gr8 for practical jokes! (works with some of the Nokia phones.)

Press and hold “0″ on the main screen to open wap browser.

BenQ-Siemens Mobile Phone Unblock Secret Codes

Software version:
*#06#
to see more info, press softkey again
English menu:
*#0001#
Deutsch menu:
*#0049#
Help us to grow this list of secret codes by comments on this Mobile secrets codes post

Software version: *#9999#
IMEI number: *#06#
Serial number: *#0001#
Battery status- Memory capacity : *#9998*246# or *#9998*228#
Debug screen: *#9998*324# - *#8999*324#
LCD kontrast: *#9998*523#
Albo*#0837#
Net Monitor: *#0324#
Changing LCD contrast: *#0523#
Memory info: *#0377#
Albo *#0246#
Reset CUSTOM memory: *2767*2878#
Alarm beeper: *#9998*289#
Vibra test: *#9998*842#
If you have more Samsung Secret Codes leave here in the comments

MySQL Database on Linux or MS Windows, we can use the command line to perform most every command line task.  If we are using MS Windows, make the path to the command line binaries is included in your system path. This thing will make easier otherwise we’ll have to type the full path to each command.

How To Restore Back using Sql Query Simply and Accurately

just login to mysql using user name and password

mysql -u username -pabcdef <database_name> format

then you will see the command prompt like this

mysql >

Make sure .sql database in the correct folder

then use command below

mysql > use <database name>

it will say “database changed”

mysql > source <*.sql>

this will execute .sql script

this command will immediately execute .sql script and Restore database without any problem other methods are not so accurate when i try check out Restore Mysql Database using command line

1. Windows Management. Windows 7 make window management so easier: you can “dock” a window to the left or right half of the screen by simply dragging it to the edge -  likely, you can drag the window to the top of the screen to maximize it

Win+Left Arrow and Win+Right Arrow dock;
Win+Up Arrow and Win+Down Arrow maximizes and restores / minimizes;
Win+Shift+Up Arrow and Win+Shift+Down Arrow maximizes and restores the vertical size.

2. Display Projection. Had enough of messing around with weird and wonderful OEM display driver utilities to get your notebook display onto an external projector? In that case, you’ll be pleased to know that projection is really quick and simple with Windows 7. Just hit Win+P

3. Cut Out The Clutter. Working on a document in a window and want to get rid of all the extraneous background noise? Simply hit Win+Home to minimize all the non-active background windows, keeping the window you’re using in its current position

4. Multi-Monitor Windows Management. The earlier tip on window management showed how you can dock windows within a monitor. One refinement of those shortcuts is that you can use Win+Shift+Left Arrow and Win+Shift+Right Arrow

5. The Black Box Recorder. Every developer wishes there was a way that an end-users could quickly and simply record a repro for the problem that they’re running into that is unique to their machine. Windows 7 comes to the rescue! Part of the in-built diagnostic tools

6. The Font of All Knowledge. we’ve got rid of the Add Fonts dialog that has served Windows faithfully for the last twenty years. (Of course, for most of that time, it’s been deprecated.

7. Installing from a USB Memory Stick. Like most notebook-class devices, this machine has no built-in media drive, and nor did I have an external USB DVD drive available to boot off. The solution:  Took a spare 4GB USB 2.0 thumb drive, reformatted it as FAT32, and simply copied the contents of the Windows 7 Beta ISO image to the memory stick using xcopy e:\ f:\ /e /f (where e: was the DVD drive and f: was the removable drive location). Not only was it easy to boot and install from the thumbdrive, it was also blindingly fast: quicker than the corresponding DVD install on my desktop machine.

8. Standards Support. Every review of Windows 7 that I’ve seen has noted the revamped WordPad and Paint applets that add an Office-like ribbon to expose their functionality. Few, however, have noticed one small but hopefully appreciated feature: WordPad can now read and write

9. ISO Burning. Easy to miss if you’re not looking for it: you can double-click on any DVD or CD .ISO image and you’ll see a helpful little applet that will enable you to burn the image to a blank disc.e both the Word 2007-compatible Office Open XML file format

10. When All Else Fails… If you can’t boot up properly, and what you really want is something you can quickly use to get at a command prompt so you can properly troubleshoot. Windows 7 now includes the ability to create a system repair disc, which is essentially a CD-bootable version of Windows that just includes the command prompt and a suite of system tools. Just type “system repair disc” in the Start Menu search box, and you’ll be led to the utility.

]]> http://it-souls.com/2010/07/windows-7-latest-build/feed/ http://it-souls.com/2010/07/remove-send-feedback-windows-7/ http://it-souls.com/2010/07/remove-send-feedback-windows-7/#comments Thu, 08 Jul 2010 03:26:45 +0000 admin http://it-souls.com/?p=1557 To remove send feedback windows 7 following are the steps to look in below

Login as Windows 7 as privileged user like administrator  go to and

Run Registry Editor (RegEdit), and navigate to the following registry key:

HKEY_CURRENT_USER\Control Panel\Desktop

Add in a new DWORD (32-bit) Value named FeedbackToolEnabled, and then set its value data as 0.

Log off and log on again for the change to take effect and remove send feedback windows 7 it will not send feedback to windows server any more

for more:

Optimize Boot Files XP
*******************
[HKEY_LOCAL_MACHINE \ SOFTWARE \ Microsoft \ Dfrg \ BootOptimizeFunction]

This key is a text value named Enable. A value of Y for this setting enables the boot files defragmenter. This setting defragments the boot files and may move the boot files to the beginning (fastest) part of the partition, but that last statement is unverified. Reboot after applying this tweak.

Windows XP Prefetcher
******************
[HKEY_LOCAL_MACHINE \ SYSTEM \ CurrentControlSet \ Control \ Session Manager \ Memory Management \ PrefetchParameters]

Under this key there is a setting called EnablePrefetcher, the default setting of which is 3. Increasing this number to 5 gives the prefetcher system more system resources to prefetch application data for faster load times. Depending on the number of boot processes you run on your computer, you may get benefits from settings up to 9. However, I do not have any substantive research data on settings above 5 so I cannot verify the benefits of a higher setting. This setting also may effect the loading times of your most frequently launched applications. This setting will not take effect until after you reboot your system.

Master File Table Zone Reservation Xp Tips
**************************************
[HKEY_LOCAL_MACHINE \ SYSTEM \ CurrentControlSet \ Control \ FileSystem]

This key settings called NtfsMftZoneReservation, the default setting of which is 1. The range of this value is from 1 to 4. The default setting reserves one-eighth of the volume for the MFT. A setting of 2 reserves one-quarter of the volume for the MFT. A setting of 3 for NtfsMftZoneReservation reserves three-eighths of the volume for the MFT and setting it to 4 reserves half of the volume for the MFT. Most users will never exceed one-quarter of the volume. I recommend a setting of 2 for most users. This allows for a “moderate number of files” commensurate with the number of small files included in most computer games and applications. Reboot after applying this tweak.

IRQ Priority Tips Tweaks XP
******************
[HKEY_LOCAL_MACHINE \ System \ CurrentControlSet \ Control \ PriorityControl]

You will need to create a new DWORD: IRQ#Priority to tweak Windows xp (where # is the number of the IRQ you want to prioritize) and give it a setting of 1. This setting gives the requisite IRQ channel priority over the other IRQs on a software level. This can be extremely important for functions and hardware subsystems that need real-time access to other parts of the system. There are several different subsystems that might benefit from this tweak. Generally, I recommend giving either the System CMOS or the video card priority. The System CMOS generally has an IRQ setting of 8, and giving it priority enhances the I/O performance of the system. Giving priority to the video card can increase frame rates and make AGP more effective.

You can give several IRQs priority in windows Xp, but I am not entirely certain how the system interacts when several IRQs are given priority – it may cause random instabilities in the system, although it is more likely that there’s a parsing system built into Windows XP to handle such an occurrence. Either way, I would not recommend it.

QoS tweak tips XP system
******************
QoS (Quality of Service) is a networking subsystem which is supposed to insure that the network runs properly. The problem with the system is that it eats up 20% of the total bandwidth of any networking service on the computer (including your internet connection). If you are running XP Professional, you can disable the bandwidth quota reserved for the system using the Group Policy Editor [gpedit.msc].

You can run the group policy editor from the Run command line. To find the setting, expand “Local Computer Policy” and go to “Administrative Templates” under “Computer Configuration.” Then find the “Network” branch and select “QoS Packet Scheduler.” In the right hand box, double click on the “Limit Reservable Bandwidth.” From within the Settings tab, enable the setting and then go into the “Bandwidth Limit %” and set it to 0%. The reason for this is that if you disable this setting, the computer defaults to 20%. This is true even when you aren’t using QoS.

Free Idle Tasks Tweak Windows XP
******************************

This tweak will free up processing time from any idle processes and allow it to be used by the foreground application. It is useful particularly if you are running a game or other 3D application. Create a new shortcut to “Rundll32.exe advapi32.dll,ProcessIdleTasks” and place it on your desktop. Double-click on it anytime you need all of your processing power, before opening the application.

Windows Indexing Services
Windows Indexing Services creates a search-able database that makes system searches for words and files progress much faster – however, it takes an enormous amount of hard drive space as well as a significant amount of extra CPU cycles to maintain the system. Most users will want to disable this service to release the resources for use by the system. To turn off indexing, open My Computer and right click on the drive on which you wish to disable the Indexing Service. Enter the drive’s properties and under the general tab, untick the box for “Allow the Indexing Service to index this disk for fast file searching.”

Priority Tweak Tips
*****************
[HKEY_LOCAL_MACHINE \ SYSTEM \ CurrentControlSet \ Control \ PriorityControl]

This setting effectively runs each instance of an application in its own process for significantly faster application performance and greater stability. This is extremely useful for users with stability problems, as it can isolate specific instances of a program so as not to bring down the entire application. And, it is particularly useful for users of Internet Explorer, for if a rogue web page crashes your browser window, it does not bring the other browser windows down with it. It has a similar effect on any software package where multiple instances might be running at once, such as Microsoft Word. The only problem is that this takes up significantly more memory, because such instances of a program cannot share information that is in active memory (many DLLs and such will have to be loaded into memory multiple times). Because of this, it is not recommended for anyone with less than 512 MB of RAM, unless they are running beta software (or have some other reason for needing the added stability).

Xp Tweak has two parts. First is to optimize XP’s priority control for the processes. Browse to HKEY_LOCAL_MACHINE \ SYSTEM \ CurrentControlSet \ Control \ PriorityControl and set the “Win32PrioritySeparation” DWORD to 38. Next, go into My Computer and under Tools, open the Folder Options menu. Select the View tab and check the “Launch folder windows in separate process” box. This setting actually forces each window into its own memory tread and gives it a separate process priority.

For More Tweaks Tips Windows Registry concern Xp. Do comments on this topic

One way is to activate the auto hide task bar option is via the registry. It should be noticed that this method is technical in nature and does require some code and registry knowledge.

Method 1: Hide Task Bar

Step:1. Click on Start and then select Run. In the Run field input regedit

Step: 2. Your registry files and folders should be viewable, the registry key you will want to search for is HKCU\Software \Microsoft\Windows \CurrentVersion \Explorer\ StuckRects2

Step: 3. Once you have find this registry key, you will want to locate a value called Settings. This value is a REG_Binary type. Within this value, you should find the settings for the taskbar, as well as other settings including icon size and icon placement.

Step: 4. This value is written only when your computer log offs, it can be difficult to catch the value. You will first have to fiddle around with the environment and then export the data.

Step: 5. Once you have located and exported the data, test to see if the taskbar works properly.

Method 2:  Hide Task Bar

Right click windows taskbar, select properties and select the checkbox which says auto hide the taskbar

Method 3: Hide Task Bar

If you are a computer beginner or not in the mood to search through your registry, then you can easily change the settings to auto- hide your taskbar using th e simple GUI method listed below.

RunAndHide is a cool utility which comes to good use in this case, this small portable executable allows you to hide and show up the taskbar when ever you want to.

This could be a good alternative to hide and show windows taskbar instead of the default option in windows of hiding the taskbar. Let’s discuss how can you hide windows taskbar to save some space just by clicking a desktop shortcut.

More Articles like Hide Task bar Goto Tips and Tricks section

OPTIONS | SETTINGS | COMPRESSSION | CREATE DEFAULT

GENERAL | (ok now that we’re there, here’s what U do next)

But 1st -> realize that everything U set on the default profile will occur everytime U rar files. So if U only need a password occasionally, or other special settings, then create another profile for those purposes. U can change which profile U need to use when WinRar is open. The Default profile is used otherwise, such as when using WinRar from the context menus in explorer.

General tab:
Archive format RAR
Compression method BEST

size (enter in BYTES the size you want as the max single Rar file). I use 51,200,000 (50,000 KB x 1024). But chose yer max size as U wish.

Update method ADD AND REPLACE FILES

Archiving options: check > PUT RECOVERY RECORD

Archiving options: check > TEST ARCHIVED FILES.

Archiving options: check > DELETE FILES AFTER ARCHIVING ( unless U want yer HDD to fill up with the rars & the original files for some reason)

Archiving options: do NOT check > Put authenticy verification, as this can be a source of Error Messages being generated upon extraction.

Archiving options: check > Create SFX ONLY if U don’t expect the person getting the filez to have WinRar. Otherwise leave it UNCHECKED.

Archiving options: do NOT check > Create Solid Archive. This can cause problems in certain cases.

Archiving options: do NOT check > Lock Arhive. This has NOTHING to do with a password.

Advanced tab:

Recovery Record -> U can leave it at 1%. Only set it higher if U expect the rar files to have a high risk of corruption. (very bad internet connections, or use on floppy disks, etc)

All else can be left alone. Don’t bother with the Compression button.

Files Tab

File Paths -> STORE RELATIVE PATHS. (unless U have a specific folder U want the files to be extracted to. Such as c:\program files\No Name Appz\link catcher).

The rest leave alone

Backup Tab

No need to change anything.

Time Tab

Files to Process -> OF ANY TIME

Comment Tab

Whatever comment U enter there will be shown on the right hand pane when WinRar opens yer Rar files. Think of something fun, catchy,interesting. I always mention that the files have recovery record set, so if they are corrupted in transfer, the person knows to use REPAIR function.

Click OK, U have now created yer default profile.

==============================================

HOW TO CREATE a PASSWORDED PROFILE, which will NOT be the default:

open WInRar

Click the ADD Icon

ADVANCED | Push the SET PASSWORD Button

Check the SHOW PASSWORD box, so U can see what U typed and also copy/paste it to wherever U need it, such as on yer post. Now only one box will be open to enter the password. COPY/PASTE it to a txt file. I call mine WinRAR_Password.txt. Do this IMMEDIATELY afer entering it, before closing that window, or U may be very sorry later.

Enter the password. It is CASE SENSITIVE. If the password is 8 or more alpha-numeric characters, no one will be able to hack it. Unless they own a super-computer. Avoid using words that are found in dictionaries.

Check the encrypt file names box. That way, even if some nasty person obtains yer Rar file, they won’t know what is in it, especially if the name U give the rar file is “Grandma_pix.rar” or whatever.

Back to GENERAL tab | PROFILES button | Save Current Settings to a New Profile

Enter the name of this profile. For example if the passwd is ht*p://www.superforum.com, U might name the profile Superforum. Only U will see this profile name. It does not go into the rar files made from it.

Do NOTHING more, do NOT set this as default profile.

Click OK | Click OK again.

Now U have a Passworded Profile.

HOW TO USE the PASSWORD PROFILE
Note -> Everything U set on the default profile will occur everytime U rar files. So when U need the password profile, follow these instructions. The Default profile is used otherwise, such as when using WinRar from the contest menus in explorer.

Open WinRar

Browse to the filez/folderz U want to Rar with Password.

Highlight all filez/folderz to be included.

Press the ADD button.

GENERAL tab | PROFILES button

Scoll down to the profile whcih has the password set. In my example Superforum

Click OK

The filez are Rar’d. U can check if U did all correctly by opening the rar filez, and seeing if a password is required.

Until U change back to DEFAULT profile in this same method, or close WinRar, all Rar’z U create after this will have a password.

HOW TO REPAIR A CORRUPTED RAR FILE:

With Win Explorer create a sub folder REPAIRED

Open WinRar, browse to the folder with the damaged Rar file(z). U can find which one is bad by selecting the 1st RAR file and using TEST button.

Select the damaged file, press REPAIR button.

In dialogue box, enter the path to the REPAIR subfolder, or browse to it.

As long as there is a RECOVERY record in that Rar, it will be repaired.

Copy all the NON-DAMAGED rars to your repair folder and rename the REPAIRED file back to it’s original name.

Proceed with extraction in the REPAIR folder as normal.

===============================================

MISC TIPS:

If U select a folder to Rar, later when U extract it inside that folder, U end up with nested folders of same name. (We’ve all seen this often when extracting rars.

So Instead, go inside the folder, select all the filez & sub-folderz. Now U have a rar inside just one folder.

Note to w***z Groups, how about using WinRar Recovery option finally, and avoiding problems with corrupt DL’s ?